Sample Letters and Track

Rigid Letter Track

Rigid Letters Track is a 3 component track, a Top, a Mutual (or Dual), and a Bottom. For display purpose, below is pictured a Mutual and a Bottom. Letters are inserted into the track above, pushed up, then in (flat against the sign), and dropped down into the track below. If the sign is overhead, this can be done with a “change pole”.

	1. Push the letter up into the track above.
	2. Then in, flat against the sign.
	3. Drop down into the bottom track below.

Flex Letter Track

Flex Letter Track is a mutual track, the slot in the top and bottom are the same. Letters are bowed out and inserted into the track. The track then “grips” the letter. This must be done by hand.

Flex track is about 1″ wide, Rigid track about 1 1/2″ - 1 3/4″ wide.